Stopping the Water Flow: How to Shut Off Your Water Main
Stopping the Water Flow: How to Shut Off Your Water Main
Blog Article
The author is making a number of great points relating to How to Locate & Turn Off Main Water Shut-Off Valves as a whole in this post following next.
One of the most common places a water main will be located in home is in your boiler room, basement, or a cut out panel in an area for your house.
When you discover the water main you will just turn the valve clockwise to shut all the water off in your home up until you have ended up the fixing. Some residences will certainly enjoy shutoff with a lever that you can pull rather than look to shut the water off.
If you try to shut the water off to your fixtures by using an angle stop and that does not function you will certainly have to shut of the water main to make your repair. There are also numerous other factors you could require to shut the water main like fixing icy pipes, repairing leakages, replacing components or taps.
Many people are not conscious that they also have a water main shutoff right in their very own house and simply call a plumber of never ever end up doing the repair service up until things obtain actually poor because they simply do not know that closing the water main is really easy.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
Do you appreciate reading up on How to Turn off the Water for Plumbing Repairs? Create a short review further down. We would be delighted to listen to your views about this write-up. We are looking forward to see you back again before long. Be sure to take the opportunity to distribute this post if you enjoyed it. We love reading our article about How to Turn off the Water for Plumbing Repairs.
Immediate support available. Report this page